Trumix TM-10 USB Audio Interface

This product is currently not available for purchase

Key Features

  • Clean, detailed sound with built-in preamp support
  • Delivers single XLR and instrument inputs for straightforward recording
  • Compact design ideal for travel and small setups
  • Connects easily to USB-C devices for quick plug-and-play use
  • Front-panel volume control for quick and easy access

Trumix TM-10 USB Audio Interface Overview

View this description in Finnish

The Trumix TM-10 USB Audio Interface is suited to solo musicians, home recordists, and content creators who need a reliable audio interface and crystal-clear sound. The TM-10 is a practical and compact option for those recording vocals, guitar, or voiceovers with a straightforward, no-fuss setup.


The TM-10 includes one XLR mic input and one 1/4-inch instrument input, allowing you to record either a microphone or instrument signal cleanly and with detail. This setup is ideal for singers who play guitar or podcasters recording speech. The built-in mic preamp delivers transparent sound quality while phantom power allows for condenser mic use when needed.


Its small footprint and USB-C connectivity make it easy to transport and quick to connect to both Windows and Mac systems. The interface offers consistent audio performance without requiring a complex setup, making it ideal for those with minimal space or who often move between recording locations.

Product Ref: 339406

Full Description

View Full Description

Specifications

  • Sampling Precision: 16bit & 24bit Adc And Dac
  • Supported Sample Rates: Dac: 44.1 Khz, 48 Khz / Adc: 44.1 Khz, 48 Khz, 96khz
  • Usb: 1 X Usb 2.0 Type C Connector
  • Leds: Red/Green Gain Indicators
  • Analogue Input 1:
  • Connector: Balanced, Via Female 3-Pin Xlr On Front Panel / Inst Mode: Unbalanced, 2-Pole (Ts) / Line Mode: Balanced (Trs)
  • Phantom Power: 48 V Phantom Power Switch
  • Analogue Input 2:
  • Connector: ¼" (6.35 Mm) Jack Socket On Front Panel / Inst Mode: Unbalanced, 2-Pole (Ts) / Line Mode: Balanced (Trs)
  • Line/Instrument Switching: Front Panel Switch
  • Microphone Input:
  • Dynamic Range: 95 Db (A-Weighted)
  • Frequency Response: 20 Hz To 20 Khz ±1 Db
  • Thd+N: <0.01 perfect (1khz@0dBu)
  • Noise Ein: -110dBu (A-Weighted)
  • Maximum Input Level: +8 Dbu At Minimum Gain
  • Gain Range: 50 Db
  • Input Impedance: 3 Kohms
  • Line Input:
  • Dynamic Range: 95 Db (A-Weighted)
  • Frequency Response: 20 Hz To 20 Khz ±1 Db
  • Thd+N: <0.01 percent (1khz@0dBu)
  • Maximum Input Level: +19 Dbu At Minimum Gain
  • Gain Range: 50 Db
  • Input Impedance: 20 Kohms
  • Instrument Input:
  • Dynamic Range: 95 Db (A-Weighted)
  • Frequency Response: 20 Hz To 20 Khz ±1 Db
  • Thd+N: <0.03 percent (1khz@0dBu)
  • Maximum Input Level: +11 Dbu At Minimum Gain
  • Gain Range: 45 Db
  • Input Impedance: 1 Mohms
  • Analogue Outputs:
  • Main Outputs: Balanced, 2 X ¼” Trs Jacks On Rear Panel
  • Stereo Headphone Output: ¼” Trs Jack On Front Panel
  • Output Level Control (Main And Headphone): On Front Panel
  • Direct Monitoring: Front Panel Switch; Allows Zero-Latency Monitoring Of Inputs
  • Line Outputs:
  • Dynamic Range: 95 Db (A-Weighted)
  • Maximum Output Level (0 Dbfs): +14 Dbu Balanced Outputs
  • Thd+N: <0.01 percent
  • Output Impedance: 221 Ohms
  • Headphone Output:
  • Dynamic Range: 90 Db (A-Weighted)
  • Maximum Output Level: +12 Dbu
  • Thd+N: <0.01 percent
  • Headphone Impedance: 30-300ohm
  • Product Code: TM-10

| Reviews of our service

Showing our latest reviews
View all
×
Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.