DISC Shure PG14UK/PG30 K6E Wireless Headset Microphone System, Ch 38

Full Description

Click on the link below to view suitable applications for this wireless package:

Fast and easy setup, even for a beginner?

Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.

How many musician can use this system simultaneously?

A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.

Why internal Antennas?

For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.

Additionally internal antennas cannot be broken during setup, use or transport.

Features/Specifications:

• Hassle free setup
• Internal antennas simplify operation and storage
• Only one channel select button
• A seven-segment LED indicated instantly if the selected channel is occupied

PG30TQG

• Cardioid condenser Headset microphone
• Smooth natural frequency response
• Comfortable wireframe design for secure fit
• Reliable at temperature and humidity extrememes
• Includes 4-pin mini connector which is compatible with all of our bodypack transmitters

PG1 Wirelesss Body Pack Transmitter:

• UHF transmitter
• Can be used with Headworn, Lavalier, instrument Microphones, or guitars and basses.
• Includes a single power/mute switch
• LED indicator showing power, mute and battery status
• 8 hours of continuous use using a 9v battery (included)
• Operating range of 75m

PG4 Wireless Diversity Receiver:

• Compact and robust UHF receiver
• Easy to use, also with no precognition about wireless technology necessary
• Microprocessor controlled diversity
• Internal antennas simplify operation and storage
• Choosing a free frequency with a touch of button

Technical Specifications

• Channel: 38
• Frequency: 606.000-630.000
• Compatible systems per frequency band (up to): 4
• Selectable frequencies: 10
• Auto Setup Features: No
• Audio Reference Companding: No
• Included Antennas: Internal 1/4-wave
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: Optional (URT)
• Case: Optional System Case
• Transmitter Display: Multi-color LED
• Receiver Display: Multi-color LED
• Battery, Endurance: 9V, >8 h
• Environment: Small to medium stages

PG4 Receiver:

• Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ
• Audio Output Level Ref.
• +/- 33 kHz deviation with
• 1 kHz tone
• XLR connector (into 100K Ω load): -19 dBV, typical
• 1/4 inch connector (into 100K Ω load): -5 dBV, typical
• Sensitivity: -105 dBm for 12 dB SINAD, typical
• Image Rejection: >50 dB, typical
• Dimensions: 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
• Dimensions: PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
• Housing: Molded ABS
• Power Requirements: 12-18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply

PG1 Bodypack Transmitter:

• Audio Input Level
• -10 dBV maximum at "mic" gain position
• +10 dBV maximum at 0dB gain position
• +20 dBV maximum at -10dB gain position
• Gain Adjustment Range: 30 dB
• Input Impedance: 1mΩ
• RF Transmitter Output: 10 mW typical (dependent on applicable country regulations)
• Dimensions: 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
• Housing: Molded ABS
• Power Requirements: One 9V alkaline or rechargeable battery
• Battery Life: Up to 8 hours (alkaline)